Payment & Shipping Terms:
|Fireproof Grade:||Grade B1||Working Temp.:||-40℃~105℃|
20mm Black Fireproof Rubber Plastic Foam Insulation Sheet Thermal Insulation Board
Rubber Foam Plastic Insulation Pipe is widely used for piping heat & cold insulation such as:
Air conditioners in household.
Solar energy water piping thermal insulation.
Buildings and industries metalized piping and tube insulation.
Special insulation and protecting for some small pipes and electrical pipelines.
TB Rubber Foam Plastic Insulation Pipe have the following advantages:
- PERFECT HEAT PRESERVATION INSULATION: The high density and closed structure of selected raw material has the ability of low thermal conductivity and stable temperature and has an isolation effect of hot and cold medium.
- GOOD FLAME RETARDANT PROPERTIES: When burned by fire, the insulation material do not melt and resulting in low somke and do not make the flame spread which can guarantee the using safety; the material is determined as nonflammable material and the range of Using temperature is from -40℃ to 105℃.
- ECO-FRIENDLY MATERIAL: The environmental friendly raw material has no stimulation and pollution, no hazard to health and environment. Moreover, it can avoid the mold growth and mouse biting; The material has the effection of corrosion-resistant, acid and alkali, it can increase the life of using.
-EASY TO INSTALL, EASY TO USE: It is convenient to install due to it is not need to install other auxiliary layer and it is just cutting and conglutinating. It will save the manual work greatly.
|Common use Wideth m||1.5||1.5||1.5||1.5||1.5|
|Note: Wideth can make from 1m-2m|
|Item||Inspection method||Unit||Test Result|
|Density||Water Replacement Method||KG/m³||60-80|
|Water absorption ratio||JISA95142||%||3.0|
|Working Temp.||Actual Experiment||℃||-40~105|
|Horizontal tensile strength||GB6344||MPA||0.40|
|Compression resistance, 25%||Sample (Length 20mm)||MPA||0.065|
|Conductivity factor||Steady State Method||W/M.K||0.038|
|Anti-ozone||24H in Sealed Container||/||Odorless|
Contact Person: Andy Wong